University of Washington HomepageUniversity of Washington Electrical Engineering Department HomepageMEMS Laboratory Homepage

Projects Archive

Microfixtures - Parallel Assembly and Testing of Microparts (1997)

 

Team Members

Karl F. Böhringer, Ken Goldberg, Kris Pister, Isam Tahhan, Yan Zhuang (UC Berkeley)

 

Summary

Fixtures are used to locate and hold parts during automated inspection, machining, or assembly. Micro-electromechanical systems (MEMS) are tiny devices built in batch processes derived from integrated circuit fabrication. We describe a design for an array of MEMS microfixtures for parallel inspection, transport, and assembly of microfabricated parts. In a microfixture array, parts are brought near the fixture by random motion provided e.g. by vibratory agitation. The fixture clamps actively close when the parts enter the fixture. In large future fixture arrays, electrostatic or optical sensors integrated into the fixture cell can trigger this clamping function. Each cell operates autonomously and no global control is necessary. We fabricated a prototype cell consisting of two upfoldable fixture walls and a bimorph thermal actuator using a standard CMOS process. This approach allows batch fabrication of large numbers of cells on a single silicon wafer, as well as easy integration of sensors and actuators that autonomously close each cell when filled.

Figure 1: 3D schematic view of micro fixture cell with fixture walls, chamfers, and actuators

Figure 2: Top view of microfixture cell before folding.

Figure 3: SEM micrograph of completed fixture cell.

 

Selected Publications

A complete list of our publications (many of them available online) can be found here.

 

Acknowledgements